Access Control High Security Full Height Turnstile Gate

Key specifications

Specification	Value
Frame	SS 304 stainless steel, thickness >= 1.5 mm; CNC laser cutting
Passage throughput	50 persons/min (nominal)
Communication	RS485
Power	AC 220 V ± 10 V, 50 Hz
Drive	DC brushless motor, 140 W / 24 V
Operating temperature	-15 to 60 °C
Humidity	< 95%
Ingress protection	IP54
Infrared sensors	9–10 pairs
Optional module	Face recognition terminal integration (solution-level, configured per project)

*Reference specifications; final configuration confirmed per project.*

Features & benefits

Full height, floor-to-ceiling rotor design

The rotor extends from floor to ceiling, creating a visible and physical barrier that helps deter climb-over attempts and unauthorized entry. This design is suited to entrances where one-person-at-a-time passage is required, such as staff gates, contractor entrances, and secure perimeter access points.

SS 304 stainless steel construction

The frame uses SS 304 stainless steel with a thickness of >= 1.5 mm and CNC laser cutting. This supports structural durability in industrial and public environments, while the stainless steel surface is suitable for regular cleaning and maintenance. The materials and fabrication method help the gate withstand frequent use in demanding access control locations.

50 persons/min passage throughput (nominal)

The gate supports a nominal passage throughput of 50 persons/min. This helps balance security with pedestrian flow, allowing sites to control access without creating unnecessary bottlenecks during shift changes, event entry, or routine staff movement.

DC brushless motor drive

The drive system uses a DC brushless motor rated at 140 W / 24 V. This provides controlled motorized movement for the rotor and supports integration into access control installations where reliable electromechanical operation is required. Power input is AC 220 V ± 10 V, 50 Hz.

RS485 communication for access control integration

RS485 communication allows the turnstile to connect with access control systems, card readers, biometric readers, and other compatible control devices. This makes it possible to combine the physical barrier of a full height turnstile with electronic identity verification and entry management. Integration requirements can be reviewed during project planning.

Infrared sensor monitoring

The gate uses 9–10 pairs of infrared sensors. These sensors help monitor passage status through the rotor section. When integrated with an access control system, the sensor data helps the controller manage authorized and unauthorized passage events.

Outdoor and challenging environment readiness

With IP54 ingress protection, an operating temperature range of -15 to 60 °C, and humidity tolerance of < 95%, the gate can be considered for outdoor and semi-outdoor installations. IP54 covers limited dust ingress and splashing water only; for continuous rain, standing water, or corrosive (for example, coastal) environments, confirm the configuration with the manufacturer against the actual site exposure. SS 304 stainless steel supports durability in industrial and public environments.

Optional face recognition integration

A face recognition terminal can be integrated as a solution-level option, configured per project. This allows sites to combine facial verification with the full height turnstile, subject to the selected access control configuration.

Applications

• Factories: Control employee, contractor, and visitor entry at production sites, staff entrances, and secure zones.
• Construction sites: Manage access to active work areas and help prevent unauthorized pedestrian entry.
• Stadiums: Support controlled entry at staff gates, VIP entrances, and operational areas during events.
• Power stations: Provide a physical access barrier for restricted pedestrian routes and security checkpoints.
• High-security facilities: Use at perimeter entrances, control rooms, data-sensitive areas, and other locations requiring strong pedestrian access control.

FAQ

What is the difference between a full height turnstile and a half height turnstile?

A full height turnstile uses a floor-to-ceiling rotor design, creating a physical barrier that is intended to deter climb-over and unauthorized passage. A half height turnstile typically uses waist-height or chest-height barriers and may suit locations where a more open appearance is preferred. For sites requiring the highest level of pedestrian physical access control, a full height turnstile is often the appropriate choice.

How does a full height turnstile prevent tailgating and climb-over?

The floor-to-ceiling rotor helps prevent climb-over by creating a tall physical barrier. The 9–10 pairs of infrared sensors monitor the passage area through the gate. When connected to an access control system via RS485, the turnstile can work with card readers, biometric devices, or other credentials to allow one authorized passage at a time.

Can this full height turnstile be installed outdoors?

The gate has IP54 ingress protection and an operating temperature range of -15 to 60 °C, with humidity tolerance of < 95%. This supports outdoor and semi-outdoor use, depending on site conditions and installation requirements. Note that IP54 does not by itself guarantee suitability for continuous rain, standing water, or corrosive environments: for such sites, provide the manufacturer with the shelter conditions, drainage situation, and environmental exposure and confirm the configuration. The SS 304 stainless steel frame is also intended for durability in public and industrial locations.

How does RS485 integration work with access control systems?

RS485 communication enables the turnstile to connect with access control controllers and compatible reader devices. The exact wiring, protocol, and integration method depend on the access control system being used. Project planners should provide their integration requirements, including credential type and controller information, so the gate can be configured appropriately.

Is face recognition integration available?

A face recognition terminal can be integrated as a solution-level option, configured per project. This allows the full height turnstile to combine physical access control with facial verification, subject to the selected configuration and access control integration needs.

Get Pricing for This Gate Model

Get Pricing for This Gate Model

To receive pricing for this Access Control High Security Full Height Turnstile Gate, email [email protected] with your required quantity, installation site, and access control integration needs. Include OEM/ODM, RS485, or face recognition module requirements where relevant. Certificates for the stated ISO 9001 and CE claims are available upon request; confirm that they cover the quoted model, the certifying entity, and the validity scope. The manufacturer, Shenzhen Anxia Technology Co., Ltd., states it ships to Europe, North America, South America, the Middle East, and Southeast Asia/Asia.